Colloidal / ionic silver - GSK-4 GREEN generator production quality
New in the offer. Microprocessor colloidal silver generator GSK-4 GREEN (version for 8 sockets / electrodes, 4 adjustments).
Technical specifications
- Condition
- New
- Invoice
- VAT invoice issued
- Model
- GSK-4 GREEN
- Manufacturer
- Nowoster
Product description
New in the offer. Microprocessor colloidal silver generator GSK-4 GREEN (version for 8 sockets / electrodes, 4 adjustments). High quality colloidal silver production including for disinfection. The best colloidal silver generator in this price range on the market.
Included in the set:
- GSK-4 GREEN generator (15V/30V/45V/60V)
- 9V or 12V power supply
- Banana plugs 4mm (max. 2.5mm wire) - 8 pcs
This generator version has 4 important adjustments:
current limit adjustment polarity reversal time adjustment maximum operating voltage adjustment voltage shut-off threshold adjustment For low current, high quality for drinking is achieved (lower concentrations). For high current, higher concentrations for disinfection are achieved. For a short polarity reversal time, high quality is achieved but it takes longer. For a longer polarity reversal time, production is faster.
To produce high-quality colloidal silver it is best to:
- Use silver wires of minimum 999 fineness. Optimal: 2.5mm 20cm 8 pcs.
- Ultra-pure distilled or demineralized water with a maximum foreign ion content of 2ppm must be used to produce colloidal silver. Tap water, mineral water, etc. must not be used. Good water includes, among others, Kamix distilled water and Orlen Aqua Tech demineralized water (available at Orlen petrol stations).
- Use glass or ceramic vessels preferably. Metal vessels must not be used.
- Electrodes must not touch the bottom or walls of the vessel. The vessel must be clean.
- A TDS meter is best for checking water purity and final concentration. Use a laser pointer to observe the colloidal fraction.
- Do not mechanically stir the colloid during the production process.
- It is recommended to clean electrodes of deposits (dark gray deposit) every 2-3 hours with a kitchen towel, tissue, cotton cloth, etc.
- Production should be carried out in a dark place at room temperature. Heating during the process or preheating water before the process (e.g. in a microwave to approx. 60-70 degrees Celsius) is permitted. Must not be in a sunlit room.
- Every few liters it is recommended to polish silver wires with fine sandpaper to a shine
- Store colloidal silver in a dark glass container in a dark place at room temperature.
Main features of the generator Adjustable current limit - 5mA/10mA/20mA/30mA Maximum output voltage adjustable 15V/30V/45V/60V Electrode spacing - approx. 6cm (diagonal approx. 9cm) Adjustment of electrode polarity reversal time - from approx. 1s to approx. 100s Adjustment of shut-off voltage threshold from Umax in the range from 20% to 70%. Automatic voltage reduction on electrodes when current is limited Generator designed for silver electrodes from 2 to 2.5mm diameter and from 10 to 20cm length Typically the generator can produce up to 10ppm (low current) to 30-50ppm (higher current) at full/partial electrode immersion or with fewer electrodes Production rate is approx. 1-2ppm per 1-2 hours depending among other things on water volume and purity and wire size, operating voltage, current limit. Production typically for a 2-3 liter jar Parameter tolerance ± 10%. Description of GSK-4 GREEN colloidal silver generator power supply in the range 9-12V DC. 9V or 12V power supply included in the set. current draw depending on settings max 0.6A. short-circuit protection for electrodes overload protection adjustable shut-off voltage threshold fully electronic polarity reversal. automatic current limiting dimensions in housing 13.5cm by 7.5cm. Height 5cm. Colloidal silver production Pour 1 to 3 liters of ultra-pure water into a clean dry vessel. Place the generator on the vessel so that the electrodes are as fully immersed as possible. Do not submerge the plugs. Connect the power supply to the mains. Production may take several to over ten hours. During the process the status LED flashes. Near the end the LED flashes faster. When the LED pulses (dims and brightens within approx. 1s) the generator has disconnected voltage from the electrodes and will not produce a higher concentration. Check the concentration with a TDS meter. During production it is recommended to clean the electrodes. If the concentration is too low, disconnect, increase the current, and reconnect the power supply to reset the generator. The generator is designed for the best drinking quality, typically up to approx. 15ppm, and for disinfection up to 50ppm (at maximum current). The best quality of colloidal silver produced is between 5 and 15ppm (for drinking). For disinfection, 30ppm and above. During production the electrodes will be covered with gray deposit (silver oxides). After the process is complete, filter the colloidal silver well (e.g. through a coffee filter) to remove deposits. The appearance of deposits is normal. Electrodes should be evenly covered with gray deposit. Operating instructions in the attachment.